Specially formulated High Strength Floor Screed Binder for Any Types of Floor Underlayment Leveling Screed
Introduction
ASCOSCREED is a specially formulated non-shrink, fast-setting, easy-spread, high strength & self-curing concentrated cement binder. ASCOSCREED is mixed proportionally with appropriate mix of sand and water, providing a shrinkage-free mortar bed and floor underlayment leveling screed that can be easily poured or pumped.
Key Features & Benefits
Easy Installation (Reduces time and cost).
Compatible with all tile-setting mortars, adhesives and floor coverings.
Polymer Modified, Medium/Thin Set Adhesive For Tile On Tile Application
INTRODUCTION
A grey cement-based polymer modified tile adhesive suitable for application on concrete/cement-plastered substrates on interior wall & floor surface for fixing ceramic tiles, vitrified tiles, tile on tile etc. with small to medium profile.
Highly Polymerized, Mould Resistant and Waterproof Ultrafine Grout for Joints Between Tiles
INTRODUCTION
Ascofine Grout is a highly polymer modified general purpose cementitious grout complying with requirements of Indian Standards. Ascofine Grout uses Portland cement as the primary binder and special additives to produce ultimate in color accuracy, stain protection & non-shrink characteristics through gas expansion for residential and commercial tile grouting. The formulation is chloride and iron free.
FEATURES & BENEFITS
Low cost, multi-purpose grout.
Cures to the dense hard joint.
Non-staining, non-shrinking.
Ready-to-use, premixed product – just add clean water.
ASCOSEAL BK 30 is specially formulated for penetrating sealer designed to resist staining caused by water soluble minerals which can be absorbed through the back and sides of porous stone or tile during installation or grouting. It allows water vapour transmission. ASCOSEAL BK 30 penetrates below the surface without altering the natural appearance of the substrate.
Environment Friendly Water Repellent for bricks, blocks and concrete and many substrates
Introduction
ASCOREPELL W is a concentrate water Repellent is VOC compliant, water base, penetrating, breathable solvent free micro emulsion concentrated silane and siloxanes material. specially formulated for use on precast and site cast concrete, clay and concrete masonry, sandstone and stucco surfaces where surface darkening is unacceptable. When cured it does not alter the appearance of surfaces and being non-film forming will allow the substrate to breathe.
Recommended Applications
Exposed Brick, Block and RCC work
Stucco walls & Mineral plasters
Concrete roof tiles and unglazed wall/floor tiles
Waterproofing and protection of the concrete constructions, drywall and cement-boards
High Quality Versatile Thin/Medium Set Adhesive For Tiles & Natural Stones
INTRODUCTION
A grey cement based highly polymer modified tile & stone adhesive suitable for application on concrete/cement-plastered or tile (tile on tile) substrates on interior wall & floor surface for fixing vitrified tiles, marble, granite & mosaic of small to medium profile. FIXOBOND PLUS surpasses the requirements of IS 15477: 2004.
Pre-Mixed, Fiber Reinforced, Self Leveling Heavy Duty Floor Screed
Introduction
ASCOSCREED HD is a specially developed fiber reinforced, free flowing heavy duty floor screed. It is manufactured from a controlled blend of special sand, aggregates, fiber, cement, polymers and additives etc. ASCOSCREED HD exhibits high flow properties making it both self leveling and smoothening. It is a pre-blended dry screed designed for use in domestic, commercial and industrial buildings.
Key Features & Benefits
Pre-mixed, cost-effective, ready to use.
Superior flow characteristics
Application is less time-consuming.
High resistance to moisture migration from the substrate
ASCOFINE GROUT S30 a highly polymer modified sanded grout is a pre-blended mixture of Portland cement, containing graded aggregates, premium grade pigments and polymer additives to provide superior flexural and bond strengths. It is designed to be mixed with water. It cures to provide a dense, hard, wear-resistant joint. Designed for use with ASCOFINE GROUT AD admix for optimum performance. ASCOFINE GROUT S30 highly polymer modified sanded floor grout is available in more than 30 colors.
FIXOBOND AD is prepared with its unique blend of latex, additives and selected ingredients offers the ultimate in bond strength and flexibility for the most demanding installation requirements for large format tile or stones to most difficult to bond substrates. It is also recommended to make cement slurry, cement screed, cement plasters and thick mortar beds to get very high mechanical property and improved physical characteristics of the bed.
Recommended Applications
Installation of vitrified tiles or stones on most difficult surfaces
Installation of ceramic tile, brick, natural stone, porcelain tile on Plywood and a variety of other substrates
Installation of tile/stone on selected grade plywood
ASCOREPELL SX is a water repellent treatment sealer specifically designed for concrete, brick, block and masonry. ASCOREPELL SX works better and lasts to help control efflorescence and give a long-term water-beading effect to water penetration. When cured it does not alter the appearance of surfaces and being non-film forming will allow the substrate to breathe. It can be used on old or new structures.
Recommended Applications
Exposed Brick, Block and RCC work
Stucco walls, concrete roof tiles and unglazed wall tiles
Waterproofing and protection of Concrete constructions
Waterproofing and Protection of Drywall and Cement-boards
Highly Polymerized, Grey/White Glass Mosaic & Stone Adhesive
Introduction
FIXOBOND PRIME is a white or grey cement based highly polymerized , self curing and high strength tile adhesive suitable for application on concrete /cement plastered or tile (tile on tile) substrates on interior, exterior walls & floor surface for fixing vitrified tiles, glass mosaics, marble and granite of medium to large profile.
Key Features & Benefits
Excellent bonding strength (C2)
Extended open time (E)
Excellent slip resistance on vertical applications (T)
Specially Developed Single Part , Free Flow Cementitious Self Leveling Underlayment
Introduction
ASCOSCREED SL is a specially developed single part, free flow cementitious self levelling underlayment. It is manufactured from a controlled blend of special sand, cement, polymers etc. ASCOSCREED SL exhibits high flow properties making it both self levelling and smoothing.
Two Part, Hygienic and High Performance Epoxy Grout cum Adhesive
Introduction
ASCOPOXY is a solvent free two part epoxy grout and as a set adhesive, offering a unique combination of features and benefits. It has high compressive, flexural and shear adhesion strength. ASCOPOXY is resistant to several acids, alkalis, corrosive agents for concrete, cleaning agents, sea water and salted water. It has excellent workability for flooring applications and is easily cleaned with water before hardening.
Recommended Applications
Very high compressive, tensile & flexural strength
Excellent resistant to a wide range of chemicals, acid, solvent & stain, etc.
Universal Cleaner and Stain Remover for all Types of Tile and Stone
Introduction
ASCOCLEAN TILEX is a high performance, single component solvent free, zero V.O.C economical tile cleaner designed for all sorts of tiles and stones. It is effective bio-degradable tile cleaning liquid suitable for removing permanent stain from ceramic tiles, granite, marble and stone including tile joints. This is specially formulated with high performance surfactants for cleaning all types of tiles in domestic and industrial applications.
Key Features & Benefits
Zero V.O.C.
Excellent stain remover and suitable for daily use
Pre-mixed, Specially Formulated Floor Screed for Light to Heavy Traffic
Introduction
ASCOSCREED RM is a specially formulated, light to heavy duty floor screed. It is manufactured from a controlled blend of specially graded sand, aggregates, cement, polymers and additives etc. ASCOSCREED RM exhibits medium flow properties making it smooth. ASCOSCREED RM is suitable for most common subfloors such as sand/cement screed and concrete. It is a pre-blended cost effective dry screed designed for using as screed in large floor areas at lesser time.
Key Features & Benefits
Pre-mixed, cost-effective, ready to use.
High resistance to moisture migration from the substrate.
Easy to install.
Compatible with all tile-setting mortars, adhesives and floor coverings.
FIXOBOND FLEX is a single component, high performance, flexible tile adhesive consists of distinguished blend of cement, well graded minerals and high content of modified polymers that forms when mixed with water an outstanding tile adhesive that capable for fixing all types of heavy or large ceramic tiles and natural stone on all common construction substrates that may be subjected to vibration or limited deflection internally or externally.
Three Part, Hygienic & High Performance Epoxy Grout
Introduction
ASCOPOXY III is a solvent & stain free 3 part epoxy grout, offering a unique combination of features and benefits. It has high compressive, flexural and shear adhesion strength. It is resistant to several acids, alkalis, corrosive agents for concrete, cleaning agents, sea water and salted water. It has excellent workability for flooring applications & it can be easily with water before hardening.
Recommended Applications
Ceramic, Porcelain, Marble, Terrazzo, Natural stone and China mosaics
Back Tile/Stone Primer for Demanding Tiling Application on Challenging Substrates
INTRODUCTION
FIXOPRIME BT is a high performance, single-component ready to use acrylic ester based back tile primer recommended for highly vitrified tiles It is an excellent adhesion promoter for low porosity non absorbing latest vitrifie tiles and gypsum or ply board.
FIXOBOND FLEX II is two components; highly polymer modified thin/ thick set premium grade ex adhesive. High polymer modification provides stability, high shear, tensile & bonding characteristics required for installation of artificial stone, natural stone & various tile over most surfaces.
FEATURES & BENEFITS
For external & internal use.
Superior workability & heatproof.
Ultra-high adhesion & flexural strength.
For a high demanding applications like flooring, exterior stone cladding, water immersion & wet areas etc.
2-Part, High performance & Multipurpose PU Based Thin Adhesive
INTRODUCTION
FIXOBOND PU is a highly modified, two-component polyurethane based high impact thin adhesive with high elasticity and no vertical slip. FIXOBOND PU is an excellent multi-purpose adhesive providing exceptional bond strength to a wide variety of substrates; concrete, glass, plastic, wood, metal, etc. This highly flexible adhesive also provides excellent peel strength.
ASCOTITE is a high-strength, fast curing 2-part medium viscous epoxy adhesive for bonding small-medium areas of different kinds of substrates like metal, wood, concrete and stone etc. It is an ideal product for bonding most materials together.
Cementitious Based Polymer Modified Tile Adhesive for Ceramic Tiles.
INTRODUCTION
FIXOBOND GENX is a cementitious polymer tile mortar/adhesive in a grey colour, designed for fixing ceramic tiles and related materials securely onto the interior wall (upto 4 feet) and floor surfaces with concrete or cement-plastered substrates, ensuring a lasting bond.
PRODUCT KEY FEATURES
Strong Bonding Capabilities
Suitable for Both Thin and Medium Bed Applications
Extremely Robust & Flexible Adhesive for The Installation of Oversized Tile & Stone for Highly Demanding Installations
Introduction
FIXOBOND FLEX+ is a single-component, self-curing tile adhesive that offers high performance and exceptional flexibility. It is composed of grey/white cement, graded minerals, and a substantial amount of additives and polymers.
