ASCOBOND AR is an acrylic latex liquid bonding agent with plaster, cement screeds and renderings to various types of surfaces. It is an acrylic modified cementitious flexible coating system. It can also be used to strengthen the various rendering mixes. When mixed with a cement/sand or aggregate combination, ASCOBOND AR becomes an effective patching and topping mortar.
Recommended Application
Excellent bonding agent.
Minimizes cracks in concrete, stucco and plaster when used as an admixture.
Eliminates the need for separate air-entraining agents
Greatly improves adhesion to the substrate.
Cement-based coatings and Waterproofing Cementitious systems
ASCOFILL is a specially modified single component ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, high strength, non-shrink crack filling powder for repairing of plaster, concrete cracks. ASCOFILL is based on a blend of white cement, polymers and graded aggregates, to provide a crack filler with good handling characteristics.
Recommended Applications
Recommended for crack repairs to all masonry, concrete, stucco cement rendering or other exterior surfaces
It can also be used for repairing brickwork, corners and surfaces
For filling small holes, imperfections and suitably primed cracks
ASCOGROUT EP – LV is a two-part, very low viscous, non-shrink epoxy injection grout based on specially selected epoxy resins and hardeners to produce a highly fluid grout for injection into cracks in masonry and concrete. ASCOGROUT EP – LV is highly penetrative in structural injection and grouting repairs.
