AAC Blocks/ Fly Ash Blocks consist of around 80% air, this aerated material is processed through autoclaving which entails high pressurised curing of aerated materials formed in cellular shapes, which are known as AAC elements.
ASCOFIX TBM is Thin Bed Block Jointing Mortar is a pre-mixed high quality mortar for AAC (Autoclaved Aerated) blocks or equivalent. ASCOFIX TBM semi premix consists of cement, graded sand and specialised polymers which combine to give superior strength, water retention and stability.
Key Features
Semi premix with Self-curing properties
Slow initial setting mortar
High coverage in comparison to conventional mortar
ASCOFIX BJM is a pre-mixed, self-curing and non-shrink thin jointing mortar for AAC (Autoclaved Aerated Concrete) blocks or equivalent. ASCOFIX BJM is a specially engineered jointing mortar with an ideal mix of OPC, graded aggregates, polymers and chemical additives.
ASCOPLAST BOND is a polymer based, exterior/interior grade bonding agent designed to be applied over properly prepared substrates prior to application of new plaster and portland cement based mixes. When properly applied, ASCOPLAST BOND helps bond plaster and cement based mixes to a variety of structurally sound substrates.
Recommended Applications
Applied over Masonry, Concrete, Drywall, Pre-cast Concrete
For bonding between Plastering/Tiling over concrete surface
ASCOLITE Ready Mix Mortar is a premixed cement based solution to substitute for the traditional site mix wall plaster. Only water has to be added with premix before plastering. The solution consists of processed sand which is dried, graded & distributed as per particle size and proportionately mixed with cement and water soluble polymers which act as additives. Also available with PP /glass Construction Fiber for higher strength, Crack Resistance and durability.
ASCOLITE Ready Mix Mortar (FR) is a premixed cement-based solution enriched with PP/glass fibre to substitute for traditional site mix, wall plaster. Water has to be added with premix before plastering. The solution consists of processed sand which is dried, graded & distributed as per particle size and proportionately mixed with cement and water-soluble polymers which act as additives. RMP (FR) with PP/glass construction fibre is suitable for higher strength, crack resistance and durability.
Ascolite Gypbond is a light green coloured liquid, ready to use, the high build bonding agent for adhering Gypsum plaster to a variety of surfaces. Ascolite Gypbond enables a mechanical key & chemical bond to Gypsum ensuring excellent grip with the substrate.
Recommended Applications
Suitable for interior or exterior.
Use to bond a variety of RCC, AAC Block’s wall and gypsum materials like new concrete, mortar, stucco, plaster, dry wall and gypsum board etc.
Specially developed Brilliant white, high yield gypsum plaster for all types of Wall and Ceiling substrates. It provides durable, smooth and aesthetic finish and is an ideal base for Painting or Wall paper application.
ASCOGLASS FIBER ROLL is highly Durable, Flexible, Alkali Resistant & it is made with an ideal engineering glass woven fabric then coated by acrylic acid copolymer liquid. ASCOGLASS FIBER ROLL has excellent properties including high water resistance, flexibility, softness, resistance to aging and attack from breakdown. It is widely used for waterproofing in roofing applications, reinforcement for natural marble, plasterboard, and Exterior Insulation Finishing Systems (EIFS).
KEY FEATURES & BENEFITS
Easy to install, especially for large & uneven surface areas
Highly flexible, light and easy to transport
Durable and reliable: Resistant to chemical agents
ASCOPUTTY is a highly polymer modified, self-curing and efflorescence resistant white cement based wall putty. It produces smooth and consistent paste when mixed with water. It resists efflorescence in Plastered walls. Being water resistant it can be used externally on Concrete/Cement plastered walls and Ceilings
-new-40kg1-1616657878-1_crop.png)
